The ignition switch (1) is located on the left side of the steering head pipe.
(1) Ignition switch
| Key Position | Function | Key Removal |
|---|---|---|
| OFF | Engine and lights cannot be operated | Key can be removed |
| ● ( ON ) | Engine and lights can be operated | Key cannot be removed |
The three position engine stop switch (1) is next to the throttle grip. When the switch is in the RUN position, the engine will operate. When the switch is in either OFF position, the engine will not operate. This switch is intended primarily as a sateth or emergency switch and should normally remain in the RUN position.
The headlight switch (1) has three positions, “ H ”, “ P ” and “ OFF ” marked by a red dot to the left of “ P ”.
H Headlight, taillight, position light and meter lights on. P Position light, taillight and meter lights on. ● ( OFF ) Headlight, taillight, position light and meter lights off.

(1) Engine stop switch (2) Headlight switch
Select HI for high beam, LO for low beam.
Move to L to signal a left turn, R to signal a right turn. Remember to return the switch to the center ( off ) after completing your turn or lane change.
Press the button to sound the horn.
The front brake lever has a lock which allows it to be used as a parking brake. Always set the parking brake when parking and before staring the engine.
|
Using the parking brake in freezing weathe may cause the brakes to freeze in the locked position. |
Squeeze the front brake lever (1) and lock it with the lock lever (2).
Squeeze the front brake lever until the lock lever releases.
(1) Front brake lever
(2) Lock lever