JAPANESE INDEX TOP
- When service is required, remember that you authorized Honda dealer knows your motorcycle best and is fully equipped to maintain and repair it. The scheduled mainenance may also be performed by a qualified service facility that normally does this kind of work; or you may perform most of the work yourself it you are mechanically qualified and have the proper tools and service data.
- These instructions are based on the assumption that the motorcycle will be used exclusively for its designed purpose. Sustained high speed poeration, or operation in unusually wet or dusty conditions, will require more frequent service than spesified in the MAINTENANCE SCHEDULE. Consult your authorized Honda dealer for recommendations applicable to you individual needs and use.
MAINTENANCE SCHEDULE
The following items require some mechanical knowledge. Certain items ( particulaly those marked* and** ) may require more technical information and tools. Consult your authorized Honda Dealer. Perform the Pre-ride Inspection at each scheduled maintenance period.
| I | INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY |
| C | CLEAN |
| R | REPLACE |
| A | ADJUST |
| L | LUBRICATE |
| ODOMETER READING [ NOTE 3 ] | ||||||
|
x 1,000 km→ |
1 | 4 | 8 | 12 | ||
|
MONTH→ |
6 | 12 | 18 | |||
| * | FUEL LINE | I | I | I | ||
| * | FUEL STRAINER SCREEN | C | C | C | ||
| * | THROTTLE OPERATION | I | I | I | ||
| AIR CLEANER | NOTE 1 | C | C | C | ||
| CRANKCASE BREATHER | NOTE 2, 4 | C | C | C | ||
| SPARK PLUG | I | R | I | |||
| * | VALVE CLEARANCE | I | I | I | I | |
| ENGINE OIL | R | R | R | R | ||
| ** | ENGINE OIL STRAINER SCREEN | C | ||||
| * | CAM CHAIN TENSION | A | A | A | A | |
| * | CARBURETOR IDLE SPEED | I | I | I | I | |
| DRIVE CHAIN | NOTE 2 | I, L EVERY 1,000 km | ||||
| BATTERY | NOTE 5 | I | I | I | ||
| BRAKE SHOE WEAR | I | I | I | |||
| BRAKE SYSTEM | I | I | I | I | ||
| * | BRAKE LIGHT SWITCH | I | I | I | ||
| * | HEADLIGHT AIM | I | I | I | ||
| CLUTCH SYSTEM | I | I | I | I | ||
| SIDE STAND | I | I | I | |||
| * | SUSPENSION | I | I | I | ||
| * | NUT, BOLT, FASTENER | NOTE 2 | I | I | ||
| ** | WHEEL | NOTE 2 | I | I | I | I |
| ** | STEERING HEAD BEARING | I | I | |||
* SHOULD BE SERVISEC BY YOUR AUTHORIZED HONDA DEALER UNLESS THE OWNER HAS PROPER TOOLS AND SERVICE DATA AND IS MECHANICALLY QUALIGIED. REFER TO THE OFFICIAL HONDA SERVICE MANUAL.
** IN THE INTEREST OF SAFETY, WE RECOMMEND THESE ITEMS BE SERVICED ONLY BY YOUR AUTHORIZED HONDA DEALER.
|
TOOL KIT ( UY )
The tool kit (1) is in the tool compartment (2) under the rear carrie. Some roadside repairs, minor adjustments and parts replacement can be performed with the tools contained in the kit.
- 10 x 12 mm open end wrench
- 14 x 17 mm open end wrench
- Pliers
- Standard/phillips screwdriver
- Screwdriver grip
- Spark plug wrench
- Handle lever
- Tool bag
TOOL KIT ( UB , NZ )
The tool kit (1) is located under the right side cover. Some roadside repairs,minor adjustments and parts replacement can be performed with the tools contained in the kit.
- 10 x 12 mm open end wrench
- 14 x 17 mm open end wrench
- Pliers
- No.2 screwdriver
- No.2 phillips screwdriver
- No.3 phillips screwdriver
- Screwdriver grip
- Spark plug wrench
- Handle lever
- Tool bag
SERIAL NUMBERS
The frame and engine serial numbers are required when registering your
motorcycle. They may also be required by your dealer when ordering replacement parts.
Record the numbers your owners manual for your reference. The frame number (1) is stamped on the left side of the steering head.
The engine number (2) is stamped on the left side of the crankcase.
MAINTENANCE PRECAUTIONS
|
|
コメント